Button Spring Replacement Tutorial

Spring instructions

replacement method

1. Unscrew the screws around the back and remove the baseplate

2. Unscrew the green circuit board on the back of the button counterclockwise and then remove it.

3. Lift up the controller to facilitate taking out the keys.

4. Pinch the white buckle at the bottom of the button with your hands, and then press the buckle in. Be careful not to pinch too hard to avoid the buckle breaking.

5. Remove the key from the front and replace the spring.

6. Press the new spring, as shown in the figure, into the key with your finger, and then install it into the black base.

7. If the spring protrudes, press the spring in to make it fit correctly on the base.

8. Insert the sensor into the button as shown in the figure and tighten it clockwise.

9. Cover the bottom plate and tighten the screws.